Our most popular graphite shaft, the filament wound Integra iDrive graphite shafts continue to impress the golf component world! You won't find a better bargain shaft out there.
Technical Specifications
Flex
A/L Combo
R/S Combo
Kick Point
Mid Kick
Mid Kick
Weight (grams)
70
70
Tip Size
.370
.370
Torque
4.1
3.1
Raw Length
41"
41"
Integra iDrive Iron Trim Chart:
Flex
3
4
5
6
7
8
9
PW
SW
Regular
0"
1/4"
1/2"
3/4"
1"
1 1/4"
1 1/2"
1 3/4"
1 3/4"
Stiff
1"
1 1/4"
1 1/2"
1 3/4"
2"
2 1/4"
2 1/2"
2 3/4"
2 3/4"
Ladies
0"
1/4"
1/2"
3/4"
1"
1 1/4"
1 1/2"
1 3/4"
1 3/4"
Senior
1"
1 1/4"
1 1/2"
1 3/4"
2"
2 1/4"
2 1/2"
2 3/4"
2 3/4"
Product Questions
Customer Questions
What's the difference between a 3.5 and a 3.1 I drive iron shaft
On the iDrive Black shafts, the R/S iron shaft will have 3.1 on it, and the L/A iron shaft will have 4.1 on it. The R/S wood shaft will have 3.5 on it, and the L/A wood shaft will have 4.5 on it.
Is the trim listed from the tip or the butt?
Trimming on a trim chart is always meant for the tip end.
Greetings. I'm interested in buying this golf shaft. It has an option to have a spine alignment. I had thought that was done when it's attached to the head and not done prior to this. Can you give me some information on this? Thank you.
Check our FAQs. A line is put on the shaft to designate what we feel is the best orientation when affixing to the head. If a shaft has graphics, these may not be in the best location aesthetically, so you should consider this too.
Maybe a dumb question but, which end do you trim?
The trim chart is the amount you trim off the tip end before installing in the head. Then after installing in the head, you trim the butt end to your preferred playing length.