Integra iDrive Tour Lite Graphite Iron Shafts
Rating:
100 % of 100
$13.99
In stock
SKU
IntegraiDriveTourLiteGraphiteIronShafts
| Display Price | 13.99 |
|---|---|
| Featured Component Products | No |
Details
The iDrive shaft line defines value. With the wild success of the Integra iDrive graphite shaft, there surfaced a demand for a lighter version. Enter the iDrive Lite!
At least 10 full grams lighter than it's counterpart, we expect this to be one of, if not THE hottest light weight value shaft in the industry. These are high quality, sharp looking, silver, filament wound beauties!
Technical Specifications
| Flex | A/L Combo | R/S Combo |
| Kick Point | Mid Kick | Mid Kick |
| Weight (grams) | 61 | 64 |
| Tip Size | .370 | .370 |
| Torque | 4.1 | 3.1 |
| Raw Length | 41" | 41" |
Integra iDrive Tour Lite Iron Shaft Trim Chart:
| Flex | 3 | 4 | 5 | 6 | 7 | 8 | 9 | PW | SW |
| Regular | 0" | 1/4" | 1/2" | 3/4" | 1" | 1 1/4" | 1 1/2" | 1 3/4" | 1 3/4" |
| Stiff | 1" | 1 1/4" | 1 1/2" | 1 3/4" | 2" | 2 1/4" | 2 1/2" | 2 3/4" | 2 3/4" |
| Ladies | 0" | 1/4" | 1/2" | 3/4" | 1" | 1 1/4" | 1 1/2" | 1 3/4" | 1 3/4" |
| Senior | 1" | 1 1/4" | 1 1/2" | 1 3/4" | 2" | 2 1/4" | 2 1/2" | 2 3/4" | 2 3/4" |
Product Questions
Customer Questions
Is a Tour 4.1 a ladies flex?
It's Ladies or Senior flex depending on how it's tipped. Check the tip trimming chart on this page.
Is the trim listed from the tip or the butt?
Trimming on a trim chart is always meant for the tip end.
Greetings. I'm interested in buying this golf shaft. It has an option to have a spine alignment. I had thought that was done when it's attached to the head and not done prior to this. Can you give me some information on this? Thank you.
Check our FAQs. A line is put on the shaft to designate what we feel is the best orientation when affixing to the head. If a shaft has graphics, these may not be in the best location aesthetically, so you should consider this too.
my ping G2's have been bored to .370
my set is 2 - 9
Would I trim my 2 iron just 3/4?
Thanks
Yes, that would be correct for Stiff flex if you're working with the R/S shaft, or Senior flex if working with the L/A shaft.
Maybe a dumb question but, which end do you trim?
The trim chart is the amount you trim off the tip end before installing in the head. Then after installing in the head, you trim the butt end to your preferred playing length.
Reviews 9
Write Your Own Review
