The MCS 75 Blue is an awesome filament wound iron shaft that is made by a very prominent shaft manufacturer (that will remain nameless). The high bend point and tip stiff technology produces a piercing trajectory and gives the player superb distance and feel.
This shaft compares very closely to the Fujikura Vitsa Pro 70 and the Grafalloy Prolaunch Red. You can not beat the price for this kind of technology.
Technical Specifications
Flex
R/S Combo
L/A Combo
Kick Point
Mid
Mid
Weight (grams)
75
75
Tip Size
.370
.370
Torque
3.0
3.9
Raw Length
41"
41"
MCS 75 Blue Iron Trim Chart:
Flex
3
4
5
6
7
8
9
PW
SW
Regular
0"
1/4"
1/2"
3/4"
1"
1 1/4"
1 1/2"
1 3/4"
1 3/4"
Stiff
1"
1 1/4"
1 1/2"
1 3/4"
2"
2 1/4"
2 1/2"
2 3/4"
2 3/4"
Ladies
0"
1/4"
1/2"
3/4"
1"
1 1/4"
1 1/2"
1 3/4"
1 3/4"
Senior
1"
1 1/4"
1 1/2"
1 3/4"
2"
2 1/4"
2 1/2"
2 3/4"
2 3/4"
Product Questions
Customer Questions
Is the trim listed from the tip or the butt?
Trimming on a trim chart is always meant for the tip end.
Greetings. I'm interested in buying this golf shaft. It has an option to have a spine alignment. I had thought that was done when it's attached to the head and not done prior to this. Can you give me some information on this? Thank you.
Check our FAQs. A line is put on the shaft to designate what we feel is the best orientation when affixing to the head. If a shaft has graphics, these may not be in the best location aesthetically, so you should consider this too.
Maybe a dumb question but, which end do you trim?
The trim chart is the amount you trim off the tip end before installing in the head. Then after installing in the head, you trim the butt end to your preferred playing length.
I recently purchased multiple iron shafts to try out. I bought one MCS Blue L/A combo as well as one MCS Blue R/S combo.
One was cut to A flex, the other cut to R flex. Are there any external markings on these shafts to tell which is the A flex or the R flex. The customer says they feel very similar.
There are no external markings for flex, since they are combo flex shafts. If they were both tipped the exact same amount, there would be no way to tell other than 1) the feel 2) possibly taking off the grip if the R/S or A/L sticker was not cut off (that might depend on how much was butt cut), or 3) clamp each shaft and hang a weight from the end of both and see which is more flexible.
