Quick Delivery

FST 115 Steel Micro-Stepped Iron Shafts

Availability: In stock

$4.99

* Required Fields

$4.99

FST 115 Steel Micro-Stepped Iron Shafts

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

FST makes incredibly consistent steel shafts. The FST 115 “micro-stepped” shaft is designed to give a slightly higher ball flight without sacrificing consistency or control. The micro-stepped shaft is the exact same shaft as the regular FST 115 except the steps on the shaft are less pronounced, hence “micro” stepped. The micro stepping gives this great iron shaft a sharp look that is in between a stepped shaft and a stepless shaft. This is the combination flex S/X. (See the trimming instructions to trim for either Stiff flex or X-Stiff flex (or in between) in the Technical Specifications tab below).

These shafts weigh 115 grams, have medium tip stiffness, a .600 butt diameter, and an 11 inch long .370 parallel tip. They are 43 inches long at raw length. With these specs, you can see that if you’re an experienced clubbuilder you have lots of custom flex and ball flight options. If you’re simply a cut and glue builder, just go by the tip trimming chart below (butt cut to your desired finished length) and you’ll find these are the best feeling iron shafts you’ve ever used!

Technical Specifications

Flex S/X Combo
Kick Point Mid Kick
Weight (grams) 115
Tip Size .370
Raw Length 43"

 

FST 115 Micro-Stepped Trim Charts:

Flex 1 2 3 4 5 6 7 8 9 PW SW
Stiff 0" 5/8" 1 1/4" 1 7/8" 2 1/2" 3 1/8" 3 3/4" 4 3/8" 5" 5" 5"
X-Stiff 2" 2 5/8" 3 1/4" 3 7/8" 4 1/2" 5 1/8" 5 3/4" 6 3/8" 7" 7" 7"